French Knitted Knotted Coasters

What to do with french knitting? Make coasters

French Knitting (or Dolly Knitting) is usually is usually the first foray into knitting that most of us have had as kids. Do you remember making long lengths of long knitted cords and then thinking  “What do I do with these now?”. It’s a question I get asked all the time, so being a crafty sort of gal I thought I’d take on the challenge and create something useful – Behold the French Knitted Knotty Coaster, inspired by nautical knots and all things ropey.

” Thanks to Nuffnang and Spotlight”

I’d totally forgotten about French Knitting and was re-inspired to try it again after receiving a wonderful goodie bag from my friends at Spotlight during a conference that they kindly supported in Sydney. It was filled with all sorts of yarn and patterns, but the item that I was keen to play with was an Automatic French Knitting Machine. Imagine just turning a handle and magically knitted cord appears!

verigated yarn cotton

The bag also contained a lovely range of variegated cotton yarns from their new Mornington range. I love the idea of variegated  yarn but because I’m a bit of a control freak, I don’t like how the colours can pool when knitted into a garment. I set myself a challenge to create something fun with this lovely cotton yarn, and French knitting was the perfect way to show off the yarn’s pretty colour range.

If you don’t have a Spotlight store near you, you can now shop online.

Now onto the DIY French Knitted Knotted Coaster instructions:

You will need:

Knitted coaster supplies required
Makes 4 coasters – 8cm (3″) square approx

  • 1 x 50g ball Mornington cotton 4ply yarn (or similar)
  • Automatic French Knitter (or manual french knitter – sometimes called knitting dolly)
  • 2mm Crochet hook
  • 1 sheet craft felt
  • Quick dry craft glue
  • Scissors
  • Heavy book

How to:

To make knitted cord

You will need 1.8m of knitted cord for each coaster. Pre-made cord or rope can be substituted if desired.

One ball of yarn made 4 coasters with a little left over.

Using Automatic Knitter – Follow instructions enclosed for threading, wind handle steadily in a clockwise direction and keep going till you have required amount of cord.
french knitting machine 2
automatic knitting machine
Tips for using Automatic French Knitter:

  1. Tension yarn as is feeds in with left hand.
  2. Allow weight to hang and rotate freely to ensure cord is pulled through steadily.
  3. Keep moving weight up as cord grows.
  4. Turn handle at a regular pace clockwise, do not turn backwards or you will drop the stitches.
  5. Keep working yarn and cord separate or they will get very tangled.
  6. If you drop a stitch use the crochet hook supplied to pick it up and place back on the knitting hooks.
  7. Use it on the edge of a table to keep cord hanging freely and unimpeded.

How to use an automatic french knitting machine

Knitting cord manually – If you don’t have an automatic french knitter you can knit the cord manually but it will take quite a while longer. There are a couple of options:

  1. Old fashioned French Knitter or Knitting Dolly. Made of wood with 4 pegs on top. The idea is the same but you must manually make each stitch. See how to french knit here.
  2. You can use knitting needles to knit iCord. I have made a video here but cast on 4 stitches instead of 3 – How to knit iCord

 

Once you have 1.8m of cord (about 70″) which makes one coaster you can cast off as follows.
cast off french knitting icord

  1. Insert crochet hook through all loops and yarn over (hook) tail end of yarn.
  2. Pull yarn through all loops.
  3. Pull yarn to tighten. Trim yarn tail to about 2″

 

Knotting

Carrick bend knot instructions
The coasters are based on a Carrick Bend Mat Knot which looks complicated but is quite simple once you get the hang of it.
I’ve used a fantastic animated knot tying website for instructions.

See Animated Instructions for Carrick Bend Mat for the first stage of knot tying.
Knotted rope coaster instructions
When you finish the instructions on the video the knot will look like the mat on the left.
I’ve added another loop all the way around to make the knot larger. To do this just follow the path of the cord around the whole way one more time.
Tighten to fill in any gaps.
Your knot should look like the mat on the right.

Finishing

trim ends
Turn mat over, if you have long tails of cord, trim back and secure ends with glue so they don’t unravel.
knotted coaster DIY
Trace finished knot shape onto the felt with a pencil.
Trim felt about 0.5cm (1/4″) smaller than the finished knot and glue securely to back.
Be a bit generous with the glue as it will give the coasters rigidity but don’t use too much or it will seep through the cord and look unattractive.
Add a few small dabs of glue to any areas of the knot that are a bit flimsy to strengthen the shape.
flatten-coasters-under-book
Weigh down with heavy book to flatten coasters and allow glue to set.
DIY rope coaster with french knitting mypoppet.com.au
All done!
They make a perfect housewarming gift that can be customised to any decor. I like how the variegated yarn gives the cord a dip dyed effect, but these would look awesome in solid colours too.
DIY rope coaster with french knitting mypoppet.com.au

DIY rope coaster with french knitting mypoppet.com.au

French Knitted roap coaster DIY
Time for drinks! It was too early for cocktails so I settled for some refreshing cucumber and lemon infused water instead.
DIY rope coaster with french knitting mypoppet.com.au

DIY rope coaster with french knitting mypoppet.com.au

DIY rope coaster with french knitting mypoppet.com.au

Time to get that French Knitter out and start making. Did you ever do French Knitting as a child? What did you do with all your knitted cord?

20 Comments

Leave a Reply

Your email address will not be published. Required fields are marked *