We Heart Saturdays Quilt Pattern

Geometric Heart quilt free pattern
AGL 690
What do you like to do on Saturdays? I like to sew. Having the Mr home from work on Saturday means I can handover the responsibility of parenting for a little while, shut myself up in the sewing room, pop on my head phones and make something. So to celebrate the joy of Saturdays in the sewing room, I’ve designed the ‘We Heart Saturdays’ Quilt. A quilt that can be whipped up in one day and enjoyed that very evening. Of course if you are new to sewing or quilting it may take a little longer, but I’ve included some short cuts if you are pressed for time.

Measurements are in inches but I have included metric conversions for fabric quantities.

Approximate Finished size = 48″x48″ (122cm x 122cm)

You will need:

quilting supplies

  • 1.75 yd (155cm) red stripe or red print, quilting cotton. width min 42″ (110cm)
  • 1.25 yd (115cm) black and white floral print, quilting cotton. width min 42″ (110cm) (I’ve used a sheet remnant)
  • Quilt batting (cotton or blend) slightly larger than finished size
  • Backing fabric slightly larger than finished size
  • Matching sewing thread (red and white)
  • Rotary cutter, quilting ruler and cutting mat.
  • Basting Spray or supplies for basting method of choice
  • 1/4″ sewing foot & regular or walking foot
  • General quilting and sewing supplies

How to:

Note:
1/4” seam allowance used throughout except for attaching binding
Make sure you iron all of your fabric before you start cutting
pre iron fabric before cutting
Cutting
From red fabric, cut:
two 12 7/8” squares
two 12 1/2″ x 24 1/2″ rectangles
one 24 7/8″ square
From black fabric, cut:
two 12 7/8” squares
one 24 7/8″ square
two 2 3/4″ (7cm) strips across width of fabric for binding

heart quilt pattern cutting guide
Top Construction
1. Join the two red rectangular piece, short sides matching to make one long rectangle (12 1/2″ x 48 1/2″)
I’ve discovered an easy method of creating triangles shapes without too much messing about, it’s called Half Square Triangle, here’s how.
half square triangle step 1
a. Lay matching sized squares over each other, right sides facing.
b. Rule a line diagonally corner to corner
c. Stitch a 1/4″ seam on either side of marked line. (I’ve enhanced the markings on the last picture to make it easier to see)

half square triangle step 2
d. Cut along the center marked line.
e. Open each triangle and press.

2. Use the half square triangle method on 2x small squares and 1x large square of each colour to make:
four small half triangle pieces and two large half triangle pieces.
3. Arrange and join as per diagram below
Geometrig heart quilt pattern layout
Now the quilt top is done!
Modern Heart design quilt

 

Backing and Quilting
4. Cut the batting and backing fabric slightly larger than the top.
5. Press top and backing fabric.
6. Lay backing fabric right side down on a smooth surface and spray lightly with basting spray, lay batting layer on top and smooth.
7. Spray basting spray onto batting and lay top over batting. Smooth down layers to ensure no creases. No pinning or further basting is required. (I actually ran out of Basting spray so there are a few pins in there to secure)

quilt-sandwich
This post has detailed instructions on backing and spray basting.
8. Quilt as desired. I’ve drawn a diagram of the quilting design I’ve done for this quilt. The straight line quilting around the edges was very close together. To speed up the process you can space the quilting lines out much further apart.
quilting guide
machine quilting
quilting stage finished
9. Square off and trim excess batting and backing
square off quilt
10. Join the binding strips end to end with 45 degree seams. Trim seams and press open. Fold the strip in half lengthways with wrong sides facing and press.
11. Staring about halfway along the one side of the quilt, and leaving a tail for joining, sew the binding to the right side of the quilt mitering the corners as you go. Stop about 6” from the starting point and join the ends neatly with a 45 degree seam. Trim surplus and finish sewing the binding to the quilt top.
Here is a blog post that clearly explains making and attaching your quilt binding, including how to make perfect mitered corners.

Turning and hand stitching binding to the back of your quilt is the traditional but time consuming method of finishing off a quilt. If you want to get this baby finished in one day, machine sewing your binding is the way to go.

machine stitched quilt binding
12. Flip the quilt over and roll the binding over the edge making sure the back of the binding extends a little further on the back of the quilt than the front side of the binding. Pin or use clips to keep in place. Stitch in the ditch between the quilt top and the binding. I’m pointing to the spot where you should sew on the front.
stitch in the ditch quilt binding
The stitching should catch the edge of the back of the binding here.cheat's machine quilt binding
All done! You can’t even tell the binding was machine stitched on.
finished quilt binding
What do you think?

geo heart quit pattern
Ready just in time for Saturday evening ‘Movie Night’.
popcorn
Get your popcorn ready, the show is about to begin.
movie night

AGL 690

Leave a Reply

Your email address will not be published. Required fields are marked *